Installing the Internal Batteries
The UPS battery trays are heavy (20.5 kg/45 lb). A minimum of two people are required to lift
the battery trays into the UPS chassis.
To install the battery trays into the UPS chassis:
1.
2.
3.
4.
5.
®
EATON Powerware
Locate the cartons labeled "Battery Tray" (IBM PN 39J4828).
Verify that the battery circuit breaker on the UPS rear panel is in the
OFF position (see Figure 13 on page 15).
Unscrew and set aside the battery retaining bracket (see Figure 10).
Battery Retaining Bracket
Figure 10. Removing the Battery Retaining Bracket
Slide the battery trays into the chassis (see Figure 11).
Figure 11. Installing the Battery Trays
Secure the battery trays to the chassis with the battery retaining
bracket and screws removed in Step 3.
5125 (9910-E65) UPS Installation Guide for IBM
C A U T I O N
®
S
Applications
164201698 Rev 1
INSTALLATION
13