Eaton Powerware 5125 Installation Manual page 13

Adapter
Plate
Front Rail Pan-Head
Screws
4. Using two clip nuts and two hex-head screws, attach the rail to the
rear of the rack (see Figure 4 and Figure 5).
The bottom rail uses positions 2 and 4 for the rear hex-head
screws. If you are installing additional rails, place the next rail
7 holes above the last installed screw.
®
EATON Powerware 5125 (9910-E65) UPS Installation Guide for IBM
Assembly Wing Nuts
Position 4
Position 3
Figure 3. Securing the Front of the Rail
Position 13
Position 11
Position 4
Position 2
Figure 4. Rear Rack Screw Positions
® S
Applications
INSTALLATION
Second Rail
First Rail
7
164201698 Rev 1