How To Find A Point; How To Show Or Hide All Points Or Points Names; How To Go To A Point - Furuno TZT9 Operator's Manual

11. Select [Comment] to display the software keyboard.
12. Enter the comment for the point.
13. Select [Save].
14. Select [Save].
15. Select [Close] to exit the menu.
4.8

How to Find a Point

You can easily move a point to the center of the screen from the points list.
1. Select [Lists] on the menu icon bar to open the lists menu.
2. Select [Points List] to open the points list.
3. Select [Name], [Color] or [Icon] in the [Sort by] area at the top of the list.
4. Select the point to find then select [Find On Chart].
The menu closes and the selected point is put at the center of the screen on the
active chart plotter display.
Note: When you use this function in the split-screen display, the split-screen dis-
play is replaced with the full-screen display.
4.9

How to Show or Hide All Points or Points Names

Points
You can show or hide all points.
1. Select [Overlay] from the RotoKey menu.
2. To show all points, select [Points]. To hide all points, deselect [Points].
Points Names
You can show or hide all points names.
1. Select [Menu] on the menu icon bar to open the main menu.
2. Select [Points].
3. To show all points names, select the [ON] icon in [Display Points Names]. To hide
all points names, select the [OFF] icon.
4.10

How to Go to a Point

Select the point to go to among the three methods shown below.
• Select the point on the screen
• Select a position on the screen
• Select the point from the points list
After you have selected a point, you can do the following.
• Restart the cross-track error (XTE) indication.
4. POINTS
4-9