How To Activate The 3D Display; How To Make The 3D View Clearer - Furuno TZT9 Operator's Manual

3. 3D DISPLAY, OVERLAYS
3.1.2

How to activate the 3D display

1. Select [3D] from the RotoKey menu. You
can also switch 2D to 3D by dragging two
fingers upward or downward.
2. Orientate the 3D display by dragging sideways with two fingers.
To switch to 2D, select [2D Mode] at the top right-hand corner of the screen.
3.1.3

How to make the 3D view clearer

In the 3D display, some topographical features are easier to see if you use the 3D Ex-
aggeration feature. This feature expands both objects on the chart and the underwater
vertically so that you can easily see the shape of the objects and position.
1. Select [Menu] on the menu icon bar to open the main menu.
2. Select [Plotter Display].
3. Select [3D Alti Exaggeration] or [3D Bathy Exaggeration].
[3D Alti Exaggeration]: Drag the circle icon to set the level for altitude.
[3D Bathy Exaggeration]: Drag the circle icon to set the level for bathymetry.
High gives the highest level of exaggeration. The example below compares the
same picture in low and high exaggerations.
Low exaggeration
4. Select [Close] to exit the menu.
3-2
Drag upward or downward.
or
Land
High exaggeration