Ais Transponder Fa-30, Fa-50 - Furuno TZT9 Operator's Manual

1. SYSTEM INTRODUCTION
1.19

AIS Transponder FA-30, FA-50

The FURUNO AIS Transponder FA-30 (or FA-50) installs in the TZT network and can
be controlled from a TZT display. To access the main menu of the transponder, do the
following:
1. At the installation of this equipment, connect the FA-30 (or FA-50) to the TZT.
2. Select [Menu] on the menu icon bar to open the main menu.
3. Select the [Initial Setup] - [FA30 Browser] or [FA50 Browser] menu.
4. Refer to the Operator's Manual for FA-30 or FA-50 for operation information.
1-26
Browser Installation
FAX30 Browser
FA30 Browser
FA50 Browser
FA-30
FA-50
Browser
Browser
Browser
Port Setup
Own Vessel Data
Sensor Status
Test
For Service
or
Initial Setup
Own Vessel Data
Message
Alarm Status
Sensor Status
Tests
For Service
Close
Close