Pop-Up Menus; Data Area (Data Box) - Furuno TZT9 Operator's Manual

1.10

Pop-up Menus

The pop-up menus let you quickly access the commands according to the selected ob-
ject, position or active display. Select an object or position to display the pop-up menu.
The figure below shows the Chart Plotter pop-up menu.
How to operate a pop-up menu
Rotate the RotoKey
a finger. The operation is same as the RotoKey menu.
• The " " mark indicates a multi-function soft control. Push the RotoKey
the menu item desired) to go to the next level.
• The " " mark indicates ON status (selected) of the item shown on the soft control.
The " " mark disappears with OFF status (deselected). Push the RotoKey
tap the menu item desired) to switch ON or OFF.
• There is no mark on a soft control that does the function labeled on the control or
displays the window for the function, for example, software keyboard. Push the Ro-
TM
toKey
1.11

Data Area (Data Box)

The data area at the left side of the screen shows the navigation data, with data boxes.
You can select the data to display in the area, and show or hide the data boxes as
necessary. The data that you can show depends on your system configuration.
Side menu
Go To
New Point
Lat/Lon
New Route
TM
to select an item. You can also select an item by dragging with
(or tap the menu item desired) to process the item.
◄ Orientation
Track Re
1. SYSTEM INTRODUCTION
TM
(or tap
TM
(or
1-13