Furuno TZT9 Operator's Manual page 85

4. POINTS
4. Select the point to edit then select [Edit].
POINT1
°
N 43 04.617'; W 65
5. To change the name of the point, select [Name] to display the software keyboard.
Change the name as follows:
1) Select the character to edit. For example, "1" is selected in the following figure.
Alphabet software keyboard
Cursor
Select this to switch to the
numeric software keyboard.
2) Select an alphanumeric character from the software keyboard.
3) Repeat steps 1) and 2) to complete the name. A name can have a maximum
of 20 alphanumeric characters.
4) Select [Save].
6. To change the position, select [Position] to display the software keyboard. Set the
position referring to step 5.
7. Select [Color] to change the color of the point symbol.
8. Select a color.
9. Select [Icon] to change the point symbol.
10. Select a symbol.
4-8
°
42.642'
Edit
Add to route
Goto
: Move the cursor to the left.
: Move the cursor to the right.
When you select
"W", "N" and "S"
are replaced with
"E" and "W".
Point
Numeric software keyboard
Select this to switch to the
alphabet software keyboard.
Select position format.