Ip Vrrp Mode; Ip Vrrp Ip; Ip Vrrp Authentication - Hirschmann PowerMICE Reference Manual

4.5.3 ip vrrp trap
This command enables vrrp traps.
Default
Format
Mode
authentication-failure
new-master
4.5.3.1 no ip vrrp trap
This command disables vrrp traps.
Format
Mode

4.5.4 ip vrrp mode

This command enables the virtual router configured on the specified interface. Enabling the status field
starts a virtual router. The parameter <vrID> is the virtual router ID which has an integer value ranging
from 1 to 255.
Default
Format
Mode
4.5.4.1 no ip vrrp mode
This command disables the virtual router configured on the specified interface. Disabling the status
field stops a virtual router.
Format
Mode

4.5.5 ip vrrp ip

This command sets the virtual router ipaddress value for an interface. The value for
Address which is to be configured on that interface for VRRP. This may be a secondary virtual IP
address. The parameter
Default
Format
Mode

4.5.6 ip vrrp authentication

This command sets the authorization details value for the virtual router configured on a specified
interface. The parameter
configured on the specified interface. The parameter
Routing Commands
© 2001- 2006 Hirschmann Automation and Control GmbH. All Rights Reserved.
disabled
ip vrrp trap {authentication-failure|new-master}
Global Config
Enable or disable the sending of a trap if this router detects an authentica-
tion failure on any of its VRRP interfaces.
Enable or disable the sending of a trap if this router becomes new master for any of its
VRRP interfaces.
no ip vrrp trap {authentication-failure|new-master}
Global Config
disabled
ip vrrp <vrID> mode
Interface Config
no ip vrrp <vrID> mode
Interface Config
is the virtual router ID which has an integer value range from 1 to 255.
<vrID>
none
ip vrrp <vrID> ip <ipaddr> [secondary]
Interface Config
{none | simple}
specifies the authorization type for virtual router
is optional, it is only required when
[key]
is the IP
<ipaddr>
31