Show Ip Vrrp; Show Ip Vrrp Interface - Hirschmann PowerMICE Reference Manual

4.5.11 show ip vrrp

This command displays whether VRRP functionality is enabled or disabled on the switch. It also
displays some global parameters which are required for monitoring This command takes no options.
Format
Modes
Admin Mode
Authentication Trap
New Master Trap
Router Checksum Errors
Router Version Errors
Router VRID Errors

4.5.12 show ip vrrp interface

This command displays all configuration information and VRRP router statistics of a virtual router
configured on a specific interface.
Format
Modes
IP Address
Secondary IP Addresses
VMAC address
Authentication type
Priority
Advertisement interval
Pre-Empt Mode
Administrative Mode
State
4.5.13 show ip vrrp interface brief
This command displays information about each virtual router configured on the switch. This command
takes no options. It displays information about each virtual router.
Format
Modes
Interface
VRID
Routing Commands
© 2001- 2006 Hirschmann Automation and Control GmbH. All Rights Reserved.
show ip vrrp
Privileged EXEC
User EXEC
Displays the administrative mode for VRRP functionality on the switch.
Represents the administrative mode for VRRP authentication.
Represents the administrative mode of the New Master Trap function.
Represents the total number of VRRP packets received with an invalid
VRRP checksum value.
Represents the total number of VRRP packets received with Unknown or
unsupported version number.
Represents the total number of VRRP packets received with invalid VRID for
this virtual router.
show ip vrrp interface <slot/port> <vrID>
Privileged EXEC
User EXEC
This field represents the configured primary IP Address for the Virtual router.
This field represents the configured secondary IP Address for the Virtual router.
Represents the VMAC address of the specified router.
Represents the authentication type for the specific virtual router.
Represents the priority value for the specific virtual router.
Represents the advertisement interval for the specific virtual router.
Is the preemption mode configured on the specified virtual router.
Represents the status (Enable or Disable) of the specific router.
Represents the state (Master/backup) of the virtual router.
show ip vrrp interface brief
Privileged EXEC
User EXEC
Valid slot and port number separated by forward slashes.
Represents the router ID of the virtual router.
34