Ip Routing - Hirschmann PowerMICE Reference Manual

4.1.12 show arp switch
This command displays connectivity between the switch and other devices. The Address Resolution
Protocol (ARP) cache identifies the MAC addresses of the IP stations communicating with the switch.
Format
Mode
MAC Address
IP Address
Interface

4.2 IP Routing

This chapter provides a detailed explanation of the IP Routing commands. The commands are divided
by functionality into the following different groups:
Show commands are used to display switch settings, statistics and other information.
Configuration Commands are used to configure features and options of the switch. For every con-
figuration command there is a show command that will display the configuration setting.
Copy commands are used to transfer configuration and informational files to and from the switch.
4.2.1 routing
This command enables routing for an interface.
The current value for this function is displayed under "show ip interface" labeled as "Routing Mode".
Default
Format
Mode
4.2.1.1 no routing
This command disables routing for an interface.
The current value for this function is displayed under "show ip interface" labeled as "Routing Mode".
Format
Mode
4.2.2 ip routing
This command enables the IP Router Admin Mode for the master switch.
Format
Mode
4.2.2.1 no ip routing
This command disables the IP Router Admin Mode for the master switch.
Routing Commands
© 2001- 2006 Hirschmann Automation and Control GmbH. All Rights Reserved.
show arp switch
Privileged EXEC
A unicast MAC address for which the switch has forwarding and/or filtering informa-
tion. The format is 6 two-digit hexadecimal numbers that are separated by colons, for
example 01:23:45:67:89:AB
The IP address assigned to each interface.
Valid slot and port number separated by forward slashes.
disabled
routing
Interface Config
no routing
Interface Config
ip routing
Global Config
21