Arp Cachesize; Arp Dynamicrenew; Arp Purge; Arp Resptime - Hirschmann PowerMICE Reference Manual

4.1.3 arp cachesize

This command configures the ARP cache size.
Format
Mode
4.1.3.1 no arp cachesize
This command configures the default ARP cache size which is 2048.
Format
Mode

4.1.4 arp dynamicrenew

This command enables ARP component to automatically renew ARP entries of type dynamic when
they age out.
Format
Mode
4.1.4.1 no arp dynamicrenew
This command disables ARP component from automatically renewing ARP entries of type dynamic
when they age out.
Format
Mode

4.1.5 arp purge

This command causes the specified IP address to be removed from the ARP cache. Only entries of type
dynamic or gateway are affected by this command.
Format
Mode

4.1.6 arp resptime

This command configures the ARP request response timeout.
The value for
timeout time in seconds. The range for
Default
Format
Mode
4.1.6.1 no arp resptime
This command configures the default ARP request response timeout.
Format
Mode
Routing Commands
© 2001- 2006 Hirschmann Automation and Control GmbH. All Rights Reserved.
arp cachesize <288-2048>
Global Config
no arp cachesize
Global Config
arp dynamicrenew
Global Config
no arp dynamicrenew
Global Config
arp purge <ipaddr>
Privileged EXEC
is a valid positive integer, which represents the IP ARP entry response
<seconds>
l
arp resptime <1-10>
Global Config
no arp resptime
Global Config
is between 1-10 seconds.
<seconds>
18