Show Ip Route Entry - Hirschmann PowerMICE Reference Manual

Next Hop IP Address

4.2.13 show ip route entry

This command displays the entire route table.
Format
Mode
Network Address
Subnet Mask
Protocol
For each Next Hop
Next Hop Interface
Next Hop IP Address
Metric
Preference
4.2.14 show ip route preferences
This command displays detailed information about the route preferences. Route preferences are used in
determining the best route. Lower router preference values are preferred over higher router preference
values.
Format
Modes
Local
Static
OSPF Intra
OSPF Inter
OSPF Type-1
OSPF Type-2
RIP
4.2.15 show ip stats
This command displays IP statistical information. Refer to RFC 1213 for more information about the
fields that are displayed.
Format
Modes
Routing Commands
© 2001- 2006 Hirschmann Automation and Control GmbH. All Rights Reserved.
The outgoing router IP address to use when forwarding traffic to the next
router (if any) in the path toward the destination. The next router will always be one
of the adjacent neighbors or the IP address of the local interface for a directly attached
network.
show ip route entry
Privileged EXEC
Is a valid network address identifying the network on the specified interface.
Is a mask of the network and host portion of the IP address for the attached network.
Tells which protocol added the specified route. The possibilities are: local, static,
OSPF or RIP.
The outgoing router interface to use when forwarding traffic to the next desti-
nation.
The outgoing router IP address to use when forwarding traffic to the next
router (if any) in the path toward the destination.
The cost associated with this route.
The administrative distance associated with this route.
show ip route preferences
Privileged EXEC
User EXEC
This field displays the local route preference value.
This field displays the static route preference value.
This field displays the OSPF Intra route preference value.
This field displays the OSPF Inter route preference value.
This field displays the OSPF Type-1 route preference value.
This field displays the OSPF Type-2 route preference value.
This field displays the RIP route preference value.
show ip stats
Privileged EXEC
26