Ip Irdp Maxadvertinterval; Ip Irdp Minadvertinterval; Ip Irdp Preference - Hirschmann PowerMICE Reference Manual

Command line interface industrial ethernet (gigabit-) switch
Hide thumbs Also See for PowerMICE:
Table of Contents

Advertisement

4.3.3.1 no ip irdp holdtime
This command configures the default value, in seconds, of the holdtime field of the router
advertisement sent from this interface.
Format
Mode

4.3.4 ip irdp maxadvertinterval

This command configures the maximum time, in seconds, allowed between sending router
advertisements from the interface. The range for maxadvertinterval is 4 to 1800 seconds.
Default
Format
Mode
4.3.4.1 no ip irdp maxadvertinterval
This command configures the default maximum time, in seconds.
Format
Mode

4.3.5 ip irdp minadvertinterval

This command configures the minimum time, in seconds, allowed between sending router
advertisements from the interface. The range for minadvertinterval is three to the value of
maxadvertinterval.
Default
Format
Mode
4.3.5.1 no ip irdp minadvertinterval
This command sets the default minimum time to the default.
Format
Mode

4.3.6 ip irdp preference

This command configures the preferability of the address as a default router address, relative to other
router addresses on the same subnet. The range is -2147483648 to -1 to 0 to 1 to 2147483647.
Default
Format
Mode
4.3.6.1 no ip irdp preference
This command configures the default preferability of the address as a default router address, relative to
other router addresses on the same subnet.
Routing Commands
© 2001- 2006 Hirschmann Automation and Control GmbH. All Rights Reserved.
no ip irdp holdtime
Interface Config
600
ip irdp maxadvertinterval <4-1800>
Interface Config
no ip irdp maxadvertinterval
Interface Config
maxadvertinterval
0.75 *
ip irdp minadvertinterval <3-maxadvertinterval>
Interface Config
no ip irdp minadvertinterval
Interface Config
0
ip irdp preference <-2147483648-2147483647>
Interface Config
28

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mach 4000

Table of Contents