Configuration Of A Static Route - Hirschmann MACH 4000 User Manual

Static Routing
3.3 Configuration of a Static
Route
In the example below, router A requires the information that it can reach
the subnet 10.0.3.0/24 via the router B (next hop). It can obtain this
information via a dynamic routing protocol or via a static routing entry.
With this information, router A can transmit data from subnet 10.0.1.0/24 via
router B into subnet 10.0.3.0/24.
Vice versa to be able to forward data of subnet 10.0.1.0/24 router B also
needs an equivalent route.
Subnet 10.0.1.0/24
10.0.1.5/24
Interface 2.1
IP=10.0.1.1
Figure 10: Statisches Routing
You can enter static routing for port-based and VLAN-based router
interfaces.
Routing L3P
Release 4.0 11/07

3.3 Configuration of a Static Route

Interface 2.1
IP=10.0.2.2
A
Interface 2.2
IP=10.0.2.1
Subnet 10.0.3.0/24
10.0.3.5/24
B
Interface 2.2
IP=10.0.3.1
31