Teledyne m640 User Manual page 20

Back Focal Distance
Mechanical Interface
Camera (L x H x W)
see Mechanical Specifications
Mass (approximate value due to
sensor variations)
Power connector
Ethernet connector
Electrical Interface
Input Voltage
Inputs/Outputs
Power Dissipation (typical)
Data Output
Ethernet Option supported
Data and Control
Environmental Conditions
Operating Temperature
Operating Relative Humidity
Storage
18 • Genie Nano Series Overview
17.52 mm (C-mount models), 12.52 mm (CS-mount models)
12 mm (model Nano XL)
21.2 mm x 29 mm x 44 mm (without lens mount or Ethernet connector)
38.9 mm x 29 mm x 44 mm (with C-mount and Ethernet connector)
23.7 mm x 59 mm x 59 mm (Nano XL without Ethernet connector)
38.3 mm x 59 mm x 59 mm (Nano XL with Ethernet connector)
~ 46g (C-mount with no lens)
~ 163g — model Nano XL
via 10-pin connector, or RJ45 in PoE mode
RJ45
+10 to +36 Volts DC (+10%/- 10%)
+9 to +56 Volts DC (Absolute min/max Range) on Auxiliary connector
Supports the Power Over Ethernet standard. (PoE Class 3 as per IEEE 802.3af)
Default models have 2 Inputs and 2 Outputs
Optional models have 1 Input and 3 Outputs
From 3.8W to 4.9W (dependent on Nano model and power supply voltage)
Up to 6.5W for model Nano XL
Gigabit Ethernet 1000Mbps (10/100 Mbps are not supported) 115 MB/sec max.
PAUSE Frame support (as per IEEE 802.3x)
GigE Vision 1.2 compliant
-20°C to +65°C (-4°F to +149°F) — temperature measured at camera housing. Any
metallic camera mounting which provides heat-sinking reduces internal temperatures.
10% to 80% non-condensing
-40°C to +80°C (-4°F to +176°F) temperature at 20% to 80% non-condensing
relative humidity
Nano Series GigE Vision Camera