Teledyne m640 User Manual page 150

Display Name Feature & Values
Metadata Mode ChunkModeActive
Chunk chunkCompatibilityMode
Compatibility
Format
Sapera LT
Gen API
Metadata ChunkSelector
Selector
Metadata Enable ChunkEnable
148 • Operational Reference
False
True
SaperaLT
GenAPI
OffsetX
OffsetY
Width
Height
PixelFormat
ExposureTime
ExposureDelay
cyclingPresetCurrentActiveSet
Timestamp
LineStatusAll
Gain
Counter1ValueAtReset
DeviceID
DeviceUserID
TestImageSelector
BinningVertical
BinningHorizontal
False
True
Description
Activates the inclusion of chunk data (metadata) in the
payload of the image.
No chunk data.
Chunk data included in payload
Selects the format of the chunk data (metadata) in the
payload of the image.
Metadata compatible with Teledyne DALSA Sapera LT 8.0.
Metadata compatible with GenICam GenAPI.
Selects the specific metadata to control, when enabled.
Add the OffsetX value used during the image acquisition
to the metadata attached to the image
Add the OffsetY value used during the image acquisition
to the metadata attached to the image.
Add the Width value used during the image acquisition to
the metadata attached to the image.
Add the Height value used during the image acquisition to
the metadata attached to the image.
Add the PixelFormat value used during the image
acquisition to the metadata attached to the image.
Add the ExposureTime value used during the image
acquisition to the metadata attached to the image.
Add the ExposureDelay value used during the image
acquisition to the metadata attached to the image.
Supported only in GenAPI compatibility mode.
Add the cyclingPresetCurrentActiveSet value used during
the image acquisition to the metadata attached to the
image.
Copies the timestampValue value at the start of exposure
to the metadata attached to the image.
Copies the LineStatusAll value at the start of exposure to
the metadata attached to the image.
Add the Gain feature value used during the image
acquisition to the metadata attached to the image.
Copies the value of the feature "counterValueAtReset" at
the start of Frame Readout, to the Metadata attached to
the image. Supported only in GenAPI compatibility mode.
Add the DeviceID value to the metadata attached to the
image.
Add the DeviceUserID value to the metadata attached to
the image.
Add the TestImageSelector value used during the image
acquisition to the metadata attached to the image.
Add the BinningVertical value used during the image
acquisition to the metadata attached to the image.
<ver. 1.03>
Add the BinningHorizontal value used during the image
acquisition to the metadata attached to the image.
<ver. 1.03>
Sets the enable state of the selected metadata. When
enabled, the metadata is included in the payload of the
image.
Selected metadata Disabled
Selected metadata Enabled
Device Version
& View
1.01
Expert
1.04
Expert
DFNC
1.04
Expert
1.01
Expert
Nano Series GigE Vision Camera