Teledyne m640 User Manual page 176

Device Access Privilege
Control
Exclusive Access
Control Access
Control Access Switchover
Active
Discovery Acknowledge
Delay
Current Heartbeat Timeout
GVCP Heartbeat Disable
Communication Timeout
Communication
Retransmissions Count
I GVSP Extended ID Mode
Fire Test Packet
Payload Size
MAC Address
Current Camera IP
Configuration
LLA
DHCP
PersistentIP
Persistent IP Address
Persistent Subnet Mask
Persistent Default Gateway
Primary Application Socket
Device Access Privilege
Control
Open Access
Exclusive Access
Control Access
Control Access Switchover
Active
174 • Operational Reference
deviceCCP
ExclusiveAccess
ControlAccess
ControlAccessSwitchoverActive
GevDiscoveryAckDelay
GevHeartbeatTimeout
GevGVCPHeartbeatDisable
GevMCTT
GevMCRC
GevGVSPExtendedIDMode
GevSCPSFireTestPacket
PayloadSize
GevMACAddress
GevCurrentIPConfiguration
GevPersistentIPAddress
GevPersistentSubnetMask
GevPersistentDefaultGateway
GevPrimaryApplicationSocket
GevCCP
ExclusiveAccess
ControlAccess
ControlAccessSwitchoverActive
Controls the device access privilege of an
application.
Grants exclusive access to the device to
an application. No other application can
control or monitor the device.
Grants control access to the device to an
application. No other application can
control the device.
Enables another application to request
control access to the device.
Indicates the maximum randomized delay
the device will wait to acknowledge a
discovery command. (RO)
Indicates the current heartbeat timeout in
milliseconds.
Disables the GVCP (GigE Vision Control
Protocol) heartbeat monitor. This allows
control switchover to an application on
another device.
Provides the transmission timeout value in
milliseconds.
Indicates the number of retransmissions
allowed when a message channel message
times out.
Enables the extended ID mode.
When this feature is set to True, the
device will fire one test packet.
Provides the number of bytes transferred
for each image or chunk on the stream
channel.
MAC address of the network interface.
Current camera IP configuration of the
selected interface.
LLA Link-Local Address Mode
DHCP Dynamic Host Configuration Protocol
Mode. Network requires a DHCP server.
PersistentIP Persistent IP Mode (static)
Persistent IP address for the selected
interface. This is the IP address the
camera uses when booting in Persistent IP
mode.
Persistent subnet mask for the selected
interface.
Persistent default gateway for the selected
interface.
Returns the UDP (User Datagram Protocol)
source port of the primary application.
Controls the device access privilege of an
application.
OpenAccess OpenAccess
Grants exclusive access to the device to
an application. No other application can
control or monitor the device.
Grants control access to the device to an
application. No other application can
control the device.
Enables another application to request
control access to the device.
1.00
Guru
DFNC
1.00
Guru
1.00
Guru
1.00
Expert
1.00
Guru
1.00
Guru
1.00
Expert
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
Nano Series GigE Vision Camera