Teledyne m640 User Manual page 119

Cycling Preset Repeater
Cycling Preset Reset Source
Valid Frame Trigger
Counter 1 End
Acquisition End
Software
Cycling Preset Reset Cmd
Cycling Preset Current Active
Set
Cycling Preset ROI Source
In-FPGA
In-Sensor
Features Activation Selector
Exposure Time
Exposure Delay
ROI Position
Output Line3
Output Line4
Binning Horizontal
Binning Vertical
Sensor Analog Gain
Nano Series GigE Vision Camera
cyclingPresetRepeater
cyclingPresetResetSource
ValidFrameTrigger
Counter1End
EndOfAcquisition
Software
cyclingPresetResetCmd
cyclingPresetCurrentActiveSet
cyclingPresetRoiPositionSource
FPGA
Sensor
cP_FeaturesActivationSelector
ExposureTime
ExposureDelay
ROI_Position
OutputLine3Control
OutputLine4Control
BinningHorizontal
BinningVertical
SensorAnalogGain
Specifies the required number of cycling preset increment
events (generated by the Cycling Preset Incremental
Source) to increment the index of the Cycling Preset
Current Active Set.
< Expert, DFNC >
Specifies the source that resets the currently active
preset. On reset the current preset index is set to 1.
< Expert, DFNC >
Reset when a Valid Frame Triggers occurs.
Reset when counter 1 ends.
Use End of Acquisition as the reset source. An End of
Acquisition occurs on acquisition stop.
Use a software command as the reset source.
Reset the position of the preset cycling to 1 and the count
to 0.
< Guru, DFNC >
Returns the index of the currently active cycling preset.
< Guru, DFNC >
Specifies the source that cycles the ROI position
(availability is sensor dependent). <Expert, DFNC>
Note: Only on models M/C640 and M/C800
The FPGA cycles the ROI position.
The sensor cycles the ROI position.
Selects the feature to control by the
cP_FeaturesActivationMode feature.
< Expert, DFNC >
The cP_FeaturesActivationMode feature controls the
exposure time.
The cP_FeaturesActivationMode feature controls the
exposure delay.
The cP_FeaturesActivationMode feature will control ROI
position.
The cP_FeaturesActivationMode feature controls the
output line 3.
The cP_FeaturesActivationMode feature controls the
output line 4.
The cP_FeaturesActivationMode controls the horizontal
binning.
The cP_FeaturesActivationMode controls the vertical
binning.
The cP_FeaturesActivationMode controls the sensor
analog gain.
Ver. 1.01
Ver. 1.01
Ver. 1.01
Ver. 1.01
— Ver. 1.05
M/C640 and
M/C800
Ver. 1.01
Ver. 1.03
Ver. 1.03
Ver. 1.04
Operational Reference • 117