Rgb Backlight; Maintenance Button - Ingenico iUP 250 Integration Manual
Hide thumbs
Also See for iUP 250:
- Troubleshooting manual (57 pages) ,
- Quick start and installation manual (2 pages)
Table of Contents
Advertisement
1.3.1.5 RGB backlight
The iUP250 has a RGB backlight controlled by applications.
Red backlight is used to indicate the following priority information:
·
Red backlight on steady: product has been tampered (Key erased, irruption).
·
Red backlight flashing slowly: product is disabled (Keys erased, no irruption).
·
Red backlight flashing quickly: product is out of order (Commissioning
needed)
.
1.3.1.6 Maintenance Button
The iUP250 has a maintenance button on the back.
-
To enter LLT mode, press the button at power up or at restart, until the red led
lights on.
-
To enter Maintenance mode, press the button at power up or at restart, until the
red led starts blinking.
-
To restart the product, press the button until the blue led lights on.
Intégration Guide_iUP250&iUR250
900009151 R11 000 01/1223
23/83
Copyright © 2012 Ingenico
All rights reserved
Hide quick links:
Advertisement
Table of Contents
