Kiosk Preparation For Iur250 Installation - Ingenico iUP 250 Integration Manual
Hide thumbs
Also See for iUP 250:
- Troubleshooting manual (57 pages) ,
- Quick start and installation manual (2 pages)
Table of Contents
Advertisement
6.2 KIOSK PREPARATION FOR IUR250 INSTALLATION
The iUR250 requires a cut out in the kiosk (dimensions in millimetres detailed in
the diagram below).
CAUTION:
The equivalent iUR250 hatched footprint surface on the kiosk must be flat and
clear of any holes and burrs.
Special attention is required for the area of anti-removal switches.
Fixing must be done by 4 M4 to M6 x12mm welded studs.
iUR250
footprint area
iUR250
Anti-removal
switches area
Intégration Guide_iUP250&iUR250
900009151 R11 000 01/1223
Cut-out drawing for iUR250.
3D design on demand.
58/83
Copyright © 2012 Ingenico
All rights reserved
Hide quick links:
Advertisement
Table of Contents
