Key Beep, Backlight And Brightness - Ingenico Move/5000 Quick Reference Manual

transaction
• 2 - [Summary] to print the terminal totals by card type
• 3 - [Clerk], select [All], or [Clerk ID] to print card type
totals for the current batch for all clerks or by individual
clerk. If [Clerk ID] is selected, the terminal prompts for
the clerk ID to be entered in order to print the appropriate
clerk report
• 4- [Open Pre-Auth], select [All], or [Date] to print
incomplete pre- authorizations or just the ones from a
specific date (YYYY/MM/DD)
NOTE:
17 – Key Beep, Backlight and Brightness
Through the terminal setting menu, you configure the Key Beep
setting based on your customized needs:
1. At home screen press [.,#*] for the administrator menu.
2. Press Setup Menu
3. Key in the administrator name and administrator password,
and then press [Enter]
4. Press [5] - Term Settings
5. Press [2] - Term HW to access the terminal hardware setting
options
6. Press [1] - Key Beep
7. Press [1] - All Off, [2] - All On or [3] - Invalid Only
8. Press [Cancel] to return to the idle menu
To change backlight setting:
1. Follow steps 1-5 above
Press [2] - Backlight
2.
Select [1] - Always Off, [2] - Always On or [3] - On/Key
3.
Press
4. Press [Cancel] to return to the home screen
Settlement report will print after a successful
batch.
29