Installing The Iup250 Pinpad As Replacement Of I9530 - Ingenico iUP 250 Integration Manual

7.5 INSTALLING THE IUP250 PINPAD AS REPLACEMENT
OF I9530
iUP250 can be installed as follow.
Existing studs on the kiosk for i9530 product are used to guide the adapter part.
Adaptator part must be permanently fixed to the kiosk.
We recommend to weld or strongly glued it.
Standard nuts cannot be used on these studs as they will interfere with the iUR250
PINPad and may create a security issue.
Top studs need to be cut to 11 mm to avoid interference with the cable sleeve.
Picture showing the installation of the iUP250 in existing i9530 kiosk
Intégration Guide_iUP250&iUR250 66/83 Copyright © 2012 Ingenico
900009151 R11 000 01/1223 All rights reserved