Key Beep And Backlight; Installation Procedure - Ingenico iWL255 Quick Reference Manual

If your terminal is missing, or if it does not belong to you, please call
Global Payments Customer Care to deactivate the terminal
immediately. As well, please call the police to report the stolen terminal.
CAUTION: NEVER ask the cardholder to divulge his/her PIN
code. Cardholders should be advised to ensure they
are not being overlooked when entering their PIN
codes.
18 – Key Beep and Backlight
Through the terminal setting menu, you configure the Key Beep setting
based on your customized needs:
1. At idle menu press [.,#*] for the administrator menu.
2. Key in the administrator name and administrator password, and
then press [Enter].
3. Select [3] to highlight Setup Menu.
Use [▼] button or press [5] to highlight Term Settings and press
4.
[Enter].
5. Select [5] to access the terminal hardware setting options.
6. Press [1] to highlight Key Beep.
7. Select [1] for All Off, [2] for All On or [3] for Invalid Only.
8. Press [Cancel] to return to the idle menu.
To change backlight setting:
1. Follow steps 1-5 above.
2. Press [2] to highlight Backlight.
3. Select [1] for All Off, [2] for All On or [3] for On/Key Press.
4. Press [Cancel] to return to the idle menu.
19 – Installation Procedure
Do not place the terminal in an area with high temperatures, vibrations,
dust, dampness or electromagnetic radiation (from a computer screen,
microwave oven, anti-theft barrier, etc.).