Table of Contents
Advertisement
The password protection screen will be presented to the user upon initiating a transaction
At idle menu press [.,#*] for the administrator menu.
1.
2.
Key in the administrator name and administrator password, and then press [Enter].
3.
Press [6] or use [▼] button to scroll down until Security is highlighted.
4.
Press [3] or use [▼] button to scroll down until Main Menu PWs is highlighted, press [Enter].
5.
Press [▼] button to scroll down to highlight the associated parameter and press [Enter].
Select which password ([1]-Off, [2]-Supervisor, [3]-Manager, [4]-Administrator or [5]-Clerk) you want to use for
6.
protection of the selected main menu option.
NOTE:
The password protection for transactions in the UnionPay
application will inherit the password setting in the payment
application.
Terminal Security
To minimize fraud or theft, ensure that you keep the terminal securely located at your place of business. If there is a point in
time when your device isn't secured, please check the serial number on the back of the terminal to confirm it is correct and
please verify that all sales/refunds are authorized.
If your terminal is missing, or if it does not belong to you, please call Global Payments Customer Care to deactivate the
terminal immediately. As well, please call the police to report the stolen terminal.
CAUTION:
NEVER ask cardholders to divulge their PIN codes.
Cardholders should be advised to ensure they are not being
overlooked when entering their PIN codes.
18 – Key Beep & Backlight
Through the terminal setting menu, you configure the Key Beep setting based on your customized needs:
1.
At idle menu press [.,#*] for the administrator menu.
2.
Key in the administrator name and administrator password, and then press [Enter].
3.
Select [3] to highlight Setup Menu.
4.
Use [▼] button or press [5] to highlight Term Settings and press [Enter].
Select [5] to access the terminal hardware setting options.
5.
6.
Press [1] to highlight Key Beep.
7.
Select [1] for All Off, [2] for All On or [3] for Invalid Only.
8.
Press [Cancel] to return to the idle menu.
To change backlight setting:
1.
Follow steps 1-5 above.
Return
PWReturn
Void
Force
PWForce
Settlement
PWSettle
Reprint
PWReprint
PWVoid
20
Advertisement
Table of Contents
