Configuring Disk Clone - HIKVISION iDS-9632NXI-I8/16S User Manual

15.6 Configuring Disk Clone

Purpose:
If the S.M.A.R.T. detection result declares the HDD is abnormal, you can choose to clone all the
data on the HDD to an inserted eSATA disk manually. Refer to Chapter 12.8 HDD Detection for
details of S.M.A.R.T detection.
Before you start:
An eSATA disk should be connected to the device.
Step 1 Go to Menu >HDD >Advanced.
Step 2 Click the Disk Clone tab to enter the disk clone configuring interface.
Step 3 Make sure the usage of the eSATA disk is set as Export.
If not, click the Set button to set it. Choose Export and click the OK button.
Network Video Recorder User Manual
Figure 15-21 Disk Clone Configuration Interface
Figure 15-22 Setting eSATA Usage
217