Face Detection - HIKVISION iDS-9632NXI-I8/16S User Manual

Related Operation: You can use the
Step 9 Click Apply to activate the settings.

11.2 Face Detection

Purpose:
Face detection function detects the face appears in the surveillance scene, and some certain
actions can be taken when the alarm is triggered.
Step 1 Go to Menu> Camera> VCA.
Step 2 Select the camera to configure the VCA.
You can click the checkbox of Save VCA Picture to save the captured pictures of VCA
detection.
Step 3 Select the VCA detection type to Face Detection.
Step 4 Check the Enable checkbox to enable this function.
Step 5 Click to enter the face detection settings interface. Configure the trigger channel,
arming schedule and linkage action for the face detection alarm. Please refer to step3~step5
of Chapter 8.1 Setting Motion Detection Alarm for detailed instructions.
Network Video Recorder User Manual
Figure 11-2 Face Detection
to clear the existing virtual line and re-draw it.
151