Configuring Network Detection; Testing Network Delay And Packet Loss; Exporting Network Packet - HIKVISION iDS-9632NXI-I8/16S User Manual

13.4 Configuring Network Detection

Purpose:
You can obtain network connecting status of NVR through the network detection function,
including network delay, packet loss, etc.

13.4.1 Testing Network Delay and Packet Loss

Step 1 Go to Menu >Maintenance >Net Detect.
Step 2 Click the Network Detection tab to enter the Network Detection menu, as shown in Figure
13-24.
Step 3 Enter the destination address in the text field of Destination Address.
Step 4 Click Test button to start testing network delay and packet loss. The testing result pops up
on the window. If the testing is failed, the error message box will pop up as well. Refer to
Figure 13-25.

13.4.2 Exporting Network Packet

Purpose:
By connecting the NVR to network, the captured network data packet can be exported to USB-flash
disk, SATA/eSATA, DVD-R/W and other local backup devices.
Step 1 Go to Menu >Maintenance >Net Detect.
Step 2 Click the Network Detection tab to enter the Network Detection interface.
Step 3 Select the backup device from the dropdown list of Device Name, as shown in Figure 13-26.
Network Video Recorder User Manual
Figure 13-24 Network Detection Interface
Figure 13-25 Testing Result of Network Delay and Packet Loss
192