Configure Live View Settings - HIKVISION iDS-9632NXI-I8/16S User Manual

4.3 Configure Live View Settings

Purpose:
Live View settings can be customized according to different needs. You can configure the output
interface, dwell time for screen to be shown, mute or turning on the audio, the screen number for
each channel, etc.
Step 1 Go to Menu >Configuration >Live View >General
Step 2 Configure the live view parameters.
 Video Output Interface: Select the video output to configure. The VGA/HDMI and
VGA2/HDMI2/Channel-Zero are provided.
 Live View Mode: Designates the display mode to be used for Live View.
 Dwell Time: The time in seconds to dwell between switching of channels when enabling
auto-switch in Live View.
 Enable Audio Output: Enables/disables audio output for the selected video output.
 Volume: Adjust the volume of live view, playback and two-way audio for the selected output
interface.
 Event Output: Designates the output to show event video.
 Full Screen Monitoring Dwell Time: The time in seconds to show alarm event screen.
Step 3 Set cameras order.
Network Video Recorder User Manual
Figure 4-7 Live View-General
55