HIKVISION iDS-9632NXI-I8/16S User Manual page 189

Two ways are provided for port mapping to realize the remote access via the cross-segment
network, UPnP™ and manual mapping.
TM
UPnP

Universal Plug and Play (UPnP™) can permit the device seamlessly discover the presence of other
network devices on the network and establish functional network services for data sharing,
communications, etc. You can use the UPnP™ function to enable the fast connection of the device
to the WAN via a router without port mapping.
Before you start:
If you want to enable the UPnP™ function of the device, you must enable the UPnP™ function of
the router to which your device is connected. When the network working mode of the device is set
as multi-address, the Default Route of the device should be in the same network segment as that
of the LAN IP address of the router.
Step 1 Go to Menu >Configuration >Network.
Step 2 Select the NAT tab to enter the port mapping interface.
Step 3 Check checkbox to enable UPnP™.
Step 4 Select the Mapping Type as Manual or Auto in the drop-down list.
OPTION 1: Auto
If you select Auto, the Port Mapping items are read-only, and the external ports are set by the
router automatically.
1) Select Auto in the drop-down list of Mapping Type.
2) Click Apply button to save the settings.
3) You can click Refresh button to get the latest status of the port mapping.
Network Video Recorder User Manual
Figure 13-16 UPnP™ Settings Interface
Figure 13-17 UPnP™ Settings Finished-Auto
188