HIKVISION iDS-9600NXI-I16/4F Series Quick Start Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Network Hardware
  5. iDS-9600NXI-I16/4F Series
  6. Quick start manual
HIKVISION iDS-9600NXI-I16/4F Series Quick Start Manual

HIKVISION iDS-9600NXI-I16/4F Series Quick Start Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Network Video Recorder
Quick Start Guide

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION iDS-9600NXI-I16/4F Series

Summary of Contents for HIKVISION iDS-9600NXI-I16/4F Series

  • Page 1 Network Video Recorder Quick Start Guide...

  • Page 2: Table Of Contents

    1.1.6 iDS-6700NXI-I/4F Series ....................12 1.2 Rear Panel ..........................13 1.2.1 iDS-96000NXI-I16/24 Series ................... 13 1.2.2 iDS-9600NXI-I8/4F and iDS-9600NI-I8/S Series .............. 15 1.2.3 iDS-9600NXI-I16/4F Series ..................... 16 1.2.4 iDS-7700NXI-I4/(16P)/8S Series ..................17 1.2.5 iDS-6700NXI-I/4F Series ....................18 Chapter 2 Installation and Connections ..................20 2.1 Installation ..........................
  • Page 3 INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS.
  • Page 4 Network Video Recorder Quick Start Guide Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
  • Page 5 Network Video Recorder Quick Start Guide Applicable Models This manual is applicable to the models listed in the following table. Series Model iDS-96064NXI-I16 DS-96000NI-I16/24 iDS-96128NXI-I16 iDS-96128NXI-I24 iDS-9616NXI-I16/4F iDS-9600NXI-I16/4F iDS-9632NXI-I16/4F iDS-9664NXI-I16/4F iDS-9632NXI-I8/4F iDS-9600NXI-I8/4F iDS-9664NXI-I8/4F iDS-9632NXI-I8/8S iDS-9600NI-I8/S iDS-9632NXI-I8/16S iDS-9664NXI-I8/16S iDS-9616NXI-I16/16S iDS-9600NXI-I16/16S iDS-9632NXI-I16/16S iDS-9664NXI-I16/16S iDS-7716NXI-I4/8S iDS-7700NXI-I4/8S...
  • Page 6 Network Video Recorder Quick Start Guide Symbol Description Provides additional information to emphasize or supplement important points of the main text. Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury.
  • Page 7 Network Video Recorder Quick Start Guide Safety Instructions  Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.  In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.

  • Page 8: Chapter 1 Panels Description

    Network Video Recorder Quick Start Guide Chapter 1 Panels Description 1.1 Front Panel 1.1.1 iDS-96000NXI-I16 Series Figure 1-1 Front Panel Table 1-1 Panel Description No. Name Function Description Front Panel Locks or unlocks the panel by the key. Lock  Turn on/off device.

  • Page 9: Ids-96000Nxi-I24 Series

    Network Video Recorder Quick Start Guide HDD sequence Shows the HDD sequence. indicator 7-inch LCD for live-view image and menu operation. 1.1.2 iDS-96000NXI-I24 Series Figure 1-2 Front Panel Table 1-2 Panel Description No. Name Function Description Front Panel Locks or unlocks the panel by the key. Lock ...

  • Page 10: Ids-9600Nxi-I8/4F And Ids-9600Ni-I8/S Series

    Network Video Recorder Quick Start Guide Ready indicator Solid blue: Device in running normally. Alarm indicator Solid red: Relay alarm occurs. USB port for additional devices such as USB mouse and USB USB interfaces Hard Disk Drive (HDD). 1.1.3 iDS-9600NXI-I8/4F and iDS-9600NI-I8/S Series Figure 1-3 Front Panel Table 1-3 Panel Description No.

  • Page 11: Ids-9600Nxi-I16/4F And Ids-9600Nxi-I16/16S Series

    Network Video Recorder Quick Start Guide 1.1.4 iDS-9600NXI-I16/4F and iDS-9600NXI-I16/16S Series Figure 1-4 Front Panel Table 1-4 Description No. Name Description Panel lock Locks or unlocks the panel by the key. Powers on/off device. Solid blue indicates device is Power switch powered on.

  • Page 12: Ids-7700Nxi-I4/(16P)/8S Series

    Network Video Recorder Quick Start Guide  Switches on/off status.  Plays or pauses the video playing in playback mode.  Advances the video by a single frame in single-frame playback mode.  Stops/starts auto switch in auto-switch mode.  Navigates between different fields and items in menus.

  • Page 13: Ids-6700Nxi-I/4F Series

    Network Video Recorder Quick Start Guide In playback mode, it can be used to play or pause the video. In single-frame play mode, pressing the Enter button will play the video by a single frame. In auto sequence view mode, the buttons can be used to pause or resume auto sequence.

  • Page 14: Rear Panel

    Network Video Recorder Quick Start Guide Table 1-6 Indicator Description Item Description Turns red when device is powered up. Turns red when data is being read from or written to HDD. Flickers blue when network connection is functioning properly. 1.2 Rear Panel 1.2.1 iDS-96000NXI-I16/24 Series Figure 1-7 Rear Panel...
  • Page 15 Network Video Recorder Quick Start Guide Figure 1-8 iDS-96000NXI-I24 Series Table 1-7 Panel Description No. Name Description HDMI1/HDMI2 HDMI video output connector. AUDIO OUT RCA connector for audio output. USB 3.0 interface Universal Serial Bus (USB) ports for additional devices such as USB mouse and USB Hard Disk Drive (HDD).

  • Page 16: Ids-9600Nxi-I8/4F And Ids-9600Ni-I8/S Series

    Network Video Recorder Quick Start Guide RS-232 Interface Connector for RS-232 devices.  Extension board 4 × RJ-45 10/100/1000 Mbps self-adaptive optical interface,  8 × RS-485 (full-duplex),  Alarm input/output: 32/16 1.2.2 iDS-9600NXI-I8/4F and iDS-9600NI-I8/S Series Figure 1-9 Rear Panel Table 1-8 Panel Description No.

  • Page 17: Ids-9600Nxi-I16/4F Series

    100 to 240 VAC 100 to 240 VAC power supply. Power Switch Switch for turning on/off the device. GROUND Ground (needs to be connected when NVR starts up). 1.2.3 iDS-9600NXI-I16/4F Series Figure 1-10 Rear Panel Table 1-9 Panel Description No. Name Description LAN1/LAN2...

  • Page 18: Ids-7700Nxi-I4/(16P)/8S Series

    Network Video Recorder Quick Start Guide D+, D- pin connects to Ta, Tb pin of controller. For Controller Port cascading devices, the first NVR’s D+, D- pin should be connected with the D+, D- pin of the next NVR. ALARM IN Connector for alarm input.

  • Page 19: Ids-6700Nxi-I/4F Series

    Network Video Recorder Quick Start Guide Table 1-10 Panel Description Name Description LAN Interface 1 network interface provided by iDS-7700NXI-I4/16P/8S , and 2 network interfaces by iDS-7716NXI-I4/8S and iDS-7732NXI-I4/8S . AUDIO OUT RCA connector for audio output. LINE IN RCA connector for audio input. HDMI HDMI video output connector.
  • Page 20 Network Video Recorder Quick Start Guide Figure 1-13 Rear Panel Table 1-11 Interface Description Index Item Description LAN1/LAN2 10M/100Mbps adaptive Ethernet interface LINE IN 3.5mm interface for line in; connect to audio input device or active pick-up, microphone, etc. AUDIO OUT 3.5mm interface;...

  • Page 21: Chapter 2 Installation And Connections

    Network Video Recorder Quick Start Guide Chapter 2 Installation and Connections 2.1 Installation During installation of the NVR:  Use brackets for rack mounting.  Ensure ample room for audio and video cables.  When routing cables, ensure that the bend radius of the cables are no less than five times than its diameter.
  • Page 22 Network Video Recorder Quick Start Guide 1) Gently pull the cover out of the device along the direction arrow ① and make it a little above the left handle. The angle between the cover and the front panel must be within 10°.
  • Page 23 Network Video Recorder Quick Start Guide Figure 2-4 Fix the Hard Disk Step 5 Push the dummy HDD back into the slot. Figure 2-5 Push the Dummy HDD into the Slot Step 6 Press the handle until you hear a click. Thus to fix the dummy HDD. Repeat above steps to install the rest dummy HDDs.

  • Page 24: Ids-7700Nxi-I4/(16P)/8S Series

    Network Video Recorder Quick Start Guide 2.2.2 iDS-7700NXI-I4/(16P)/8S Series Purpose: The following section introduces the HDD installation for the iDS-7700NXI-I4/8S Series and iDS-7700NXI-I4/16P/8S series NVR. Take the example of iDS-7700NXI-I4/8S to describe installation steps. Step 1 Remove the cover from the NVR by unfastening the screws on the rear and side panel. Figure 2-8 Remove Cover Step 2 Connect one end of the data cable to the motherboard of NVR and the other end to the HDD.

  • Page 25: Other Series

    Network Video Recorder Quick Start Guide Figure 2-10 Connect Power Cable Step 4 Place the HDD on the bottom of the device and then fasten the screws on the bottom to fix the HDD. Figure 2-11 Fix Hard Disk 2.2.3 Other Series Purpose: Here we take the example of HDD installation of iDS-9600NXI-I8/4F Series to describe the steps.
  • Page 26 Network Video Recorder Quick Start Guide Figure 2-12 Fasten Hard Disk Step 2 Insert the key and turn in clockwise direction to open the panel lock. Step 3 Press the buttons on the panel of two sides and open the front panel. Figure 2-13 Open Front Panel Step 4 Insert the hard disk along the slot until it is placed into position.

  • Page 27: Connections

    Network Video Recorder Quick Start Guide 2.3 Connections 2.3.1 Alarm Input Wiring The alarm input is an open/closed relay. To connect the alarm input to the device, use the following diagram. If the alarm input is not an open/close relay, please connect an external relay between the alarm input and the device.

  • Page 28: Alarm Connection

    Network Video Recorder Quick Start Guide If you connect an AC load to the alarm output 3 of the NVR, then you must remove the JP 3 jumper. 2.3.3 Alarm Connection To connect alarm devices to the NVR: Step 1 Disconnect pluggable block from the ALARM IN /ALARM OUT terminal block. Step 2 Unfasten stop screws from the pluggable block, insert signal cables into slots and fasten stop screws.

  • Page 29: Hdd Storage Calculation Chart

    Network Video Recorder Quick Start Guide 2.4 HDD Storage Calculation Chart The following chart shows an estimation of storage space used based on recording at one channel for an hour at a fixed bit rate. Bit Rate Storage Used 128K 160K 192K 224K...

  • Page 30: Chapter 3 Menu Operation

    Network Video Recorder Quick Start Guide Chapter 3 Menu Operation 3.1 Start up Your Device Proper startup and shutdown procedures are crucial to expanding the life of the NVR. To start your device: Step 1 Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an Uninterruptible Power Supply (UPS) be used in conjunction with the device.

  • Page 31: Configure Unlock Pattern For Login

    Network Video Recorder Quick Start Guide We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.

  • Page 32: Log Into The System

    Network Video Recorder Quick Start Guide Figure 3-3 Draw the Pattern  Connect at least 4 dots to draw the pattern.  Each dot can be connected for once only. Step 3 Draw the same pattern again to confirm it. When the two patterns match, the pattern is configured successfully.

  • Page 33: Enter Wizard To Configure Quick Basic Settings

    Network Video Recorder Quick Start Guide Figure 3-4 Login Interface Step 3 Input Password. Step 4 Click Login to log in. In the Login dialog box, if you enter the wrong password 7 times, the current user account will be locked for 60 seconds.

  • Page 34: Network Settings

    Network Video Recorder Quick Start Guide 3.6 Network Settings Purpose: Network settings must be properly configured before you operate device over network. Step 1 Go to System > Network > TCP/IP. Figure 3-6 Network Settings Step 2 Select the General tab. Step 3 In the General Settings interface, you can configure the following settings: NIC Type, IPv4 Address, IPv4 Gateway, MTU and DNS Server.

  • Page 35: Start Live View

    Network Video Recorder Quick Start Guide Step 1 Click on the main menu bar to enter the Camera Management. Step 2 Click the Custom Add tab on the title bar to enter the Add IP Camera interface. Figure 3-7 Add IP Camera Step 3 Enter IP address, protocol, management port, and other information of the IP camera to add.

  • Page 36: One-Touch Raid Configuration

    Network Video Recorder Quick Start Guide Figure 3-8 Live View You can use the toolbar at the window bottom to realize the capture, instant playback, audio on/off, digital zoom, live view strategy, show information and start/stop recording, etc. 3.9 One-Touch RAID Configuration Purpose: The device supports the RAID storage function.

  • Page 37: Recording Settings

    Network Video Recorder Quick Start Guide Step 3 Edit the array name in Array Name text filed and click OK to start configuring. If you install 4 or more HDDs, a hot spare disk for array rebuilding will be created. Step 4 A message box will pop up when the array creation is completed, click OK on it.

  • Page 38: Playback

    Network Video Recorder Quick Start Guide Figure 3-10 Record Schedule Step 5 Select a day and click-and-drag the mouse on the time bar to set the record schedule. Step 6 Click Apply to save the settings. 3.11 Playback The recorded video files on the hard disk can be played back in the following modes: instant playback, all-day playback for the specified channel, and playback by normal/important/custom/event/smart/tag/sub-periods/external file search.
  • Page 39 Network Video Recorder Quick Start Guide Figure 3-11 Playback Interface Step 4 Select the channel(s) to or execute simultaneous playback of multiple channels.

  • Page 40: Chapter 4 Face Picture Comparison

    Network Video Recorder Quick Start Guide Chapter 4 Face Picture Comparison Purpose: The device supports the face picture comparison alarm and face capture for the connected camera based on face recognition feature. The chapter is only available for iDS-9600NXI-I16/4F and iDS-9600NXI-I8/4F series.

  • Page 41: Chapter 5 Access By Web Browser

    Network Video Recorder Quick Start Guide Chapter 5 Access by Web Browser You shall acknowledge that the use of the product with Internet access might be under network security risks. For avoidance of any network attacks and information leakage, please strengthen your own protection.
  • Page 42 Network Video Recorder Quick Start Guide  If the device is already activated, enter the user name and password in the login interface, and click the Login button. Figure 5-2 Login Step 3 Install the plug-in before viewing the live video and managing the camera. Please follow the installation prompts to install the plug-in.
  • Page 43 UD09428B...

This manual is also suitable for:

Ds-96000ni-i24 seriesDs-96000ni-i16 seriesIds-9600nxi-i8/4f seriesIds-9600ni-i8/s seriesIds-9600nxi-i16/16s seriesIds-7700nxi-i4/8s series ... Show all

Table of Contents