HIKVISION iDS-9632NXI-I8/16S User Manual page 190

OPTION 2: Manual
If you select Manual as the mapping type, you can edit the external port on your demand by
clicking to activate the External Port Settings dialog box.
Steps:
1) Select Manual in the drop-down list of Mapping Type.
2) Click
for server port, http port, RTSP port and https port respectively.
 You can use the default port No., or change it according to actual requirements.
 External Port indicates the port No. for port mapping in the router.
 The value of the RTSP port No. should be 554 or between 1024 and 65535, while the value
of the other ports should be between 1 and 65535 and the value must be different from
each other. If multiple devices are configured for the UPnP™ settings under the same router,
the value of the port No. for each device should be unique.
3) Click Apply button to save the settings.
4) You can click Refresh button to get the latest status of the port mapping.
Step 5 Enter the virtual server setting page of router; fill in the blank of Internal Source Port with
the internal port value, the blank of External Source Port with the external port value, and
other required contents.
Network Video Recorder User Manual
to activate the External Port Settings dialog box. Configure the external port No.
Figure 13-18 External Port Settings Dialog Box
Figure 13-19 UPnP™ Settings Finished-Manual
189