10.1 Configuring POS Settings
Step 1 Go to Menu >Configuration >POS >POS Settings
Step 2 Select the POS from the drop-down list.
Up to 16 POS devices are supported.
Step 3 Check the checkbox to enable the POS feature.
Step 4 Select the POS protocol to Universal Protocol, EPSON, AVE or NUCLEUS.
When the new protocol is selected, you should reboot the device to activate the new settings.
Universal Protocol
Click the Advanced button to expand more settings when selecting the universal protocol.
You can set the start line tag, line break tag and end line tag for the POS overlay characters,
and the case-sensitive property of the characters.
Network Video Recorder User Manual
Chapter 10 POS Configuration
Figure 10-1 POS Settings
140