Quick Setting Toolbar In Live View Mode - HIKVISION iDS-9632NXI-I8/16S User Manual

 Main Monitor: Enter Main operation mode.
In the live view mode of the main output monitor, the menu operation is not available while Aux
output mode is enabled.

4.2.4 Quick Setting Toolbar in Live View Mode

On the screen of each channel, there is a quick setting toolbar which shows when you single click
the mouse in the corresponding screen.
Icon
/
Instant Playback only shows the record in last five minutes. If no record is found, it means
there is no record during the last five minutes.
3D Positioning is for zooming in/out the specific area of live image.
Use the left key of mouse to click on the desired position in the video image and drag a rectangle
area in the lower right direction, the camera will move the position to the center and enable the
rectangle area to zoom in. Use the left key of mouse to drag a rectangle area in the upper left
direction to move the position to the center and enable the rectangle area to zoom out.
Digital Zoom is for zooming in the live image. You can zoom in the image to different
proportions (1 to16X) by moving the sliding bar from
wheel to control the zoom in/out.
Network Video Recorder User Manual
Figure 4-2 Quick Setting Toolbar
Table 4-4 Description of Quick Setting Toolbar Icons
Description Icon
Enable/Disable
Manual Record
Capture
Image Settings
Information
Main/Sub-Stre
am
Description Icon
Instant
Playback
PTZ Control
Face
Detection
Fisheye
Expansion
Close
to . You can also scroll the mouse
51
Description
Mute/Audio
/
on
Digital Zoom
Live View
Strategy
3D
Positioning