Configure Disk Clone; Repair Database - HIKVISION LTN07128/256 User Manual

2. Click a HDD to view details.

13.4.4 Configure Disk Clone

Select the HDDs to clone to the eSATA HDD.
Before You Start
Connect an eSATA disk to the device.
Steps
1. Go to Maintenance → HDD Operation → HDD Clone.
2. Check the HDD to clone. The capacity of the selected HDD must match the capacity of the clone
destination.
3. Click Clone.
4. Click Yes on the pop up message box to create the clone.

13.4.5 Repair Database

Repairing database will rebuild all databases. It might help to improve your system speed after
upgrade.
Steps
1. Go to Storage → Storage Device.
2. Select the drive.
3. Click Repair Database.
4. Click Yes.
Note
● Repairing database will rebuild all databases. Existing data will not be affected, but local
search and playback functions will not be available during the process, you can still achieve
Network Video Recorder User Manual
Figure 13-8 HDD Clone
122