Step 3 Select the IP camera from the list and click the
click the One-touch Adding button to add all cameras (with the same login password) from
the list.
Make sure the camera to add has already been activated.
Step 4 (For the encoders with multiple channels only) check the Channel Port
window, as shown in the following figure, and click OK to add multiple channels.
OPTION 3:
Step 1 On the IP Camera Management interface, click the Custom Adding button to pop up the Add
IP Camera (Custom) interface.
Network Video Recorder User Manual
Figure 3-4 Selecting Multiple Channels
Figure 3-5 Custom Adding IP Camera Interface
button to add the camera. Or you can
41
in the pop-up
checkbox