Safety Instruction - ACME SPLENDOR 90 User Manual

1. Safety Instruction

WARNING
 Please keep this User Guide for future consultation. If you sell the unit to another user, be
sure that they also receive this instruction booklet.
 Unpack and check carefully there is no transportation damage before using the unit.
 Before operating, ensure that the voltage and frequency of power supply match the power
requirements of the unit.
 It's important to ground the yellow/green conductor to earth in order to avoid electric
shock.
 The unit is for indoor use only. Use only in a dry location.
 The unit must be installed in a location with adequate ventilation, at least 50cm from
adjacent surfaces. Be sure that no ventilation slots are blocked.
 Disconnect main power before replacement or servicing.
 Make sure there is no flammable materials close to the unit while operating as it is fire
hazard.
 Use safety cable when fixes this unit.
 Maximum ambient temperature is TA: 40℃. Don't operate it where the temperature is
higher than this.
 In the event of serious operating problem, stop using the unit immediately. Never try to
repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or
malfunction. Please contact the nearest authorized technical assistance center. Always
use the same type spare parts.
 Do not touch any wire during operation as high voltage might be causing electric shock.
Warning
 To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or
moisture.
 Do not open the unit within five minutes after switching off.
 The housing, the lenses must be replaced if they are visibly damaged.
Please read carefully the instruction, which includes important
information about the installation, usage and maintenance.
2A