How To Control The Unit; Master/Slave Built-In Preprogram Function; Easy Controller - ACME SPLENDOR 90 User Manual

5. How To Control The Unit

You can operate the unit in three ways:
1. By master/slave built-in preprogram function
2. By easy controller
3. By universal DMX controller

5.1 Master/Slave Built-in Preprogram Function

By linking the units in master/slave connection, the first unit will control the other units to
give an automatic, sound activated, synchronized light show. This function is good when you
want an instant show.
2-light show
In slave mode, slave 1 means the unit run as the master unit and slave 2 means 2-light show.
In order to create a great light show, you can set slave 2 on the second unit to get contrast
movement to each other, even if you have two units only.

5.2 Easy Controller

The easy remote control is used only in master/slave mode. By connecting
to the 1/4" microphone jack of the first unit, you will find that the remote
controller on the first unit will control all the other units for Stand by,
Function and Mode selection.
Stand By Blackout the unit
Function 1. Sync. Strobe
2. Async strobe
3. Sound Strobe
Mode Sound (LED OFF)
Select Show Fade Speed
1-4 1. Fast
2. Middle
3. Slow
LED On LED Slow
blinking
10A
Hold to adjust
1. Pan position
2. Tilt position
3. Dimmer
LED Fast
blinking