Dmx Controller - ACME SPLENDOR 90 User Manual

5.3 DMX Controller

Use universal DMX controller to control the units, you have to set DMX address from 1 to
512 channel so that the units can receive DMX signal.
Press the MENU button up to when the DMX Address is showing on the display. Press
ENTER button and the display will blink. Use DOWN and UP button to change the DMX512
address. Once the address has been selected, press and keep ENTER button to store when.
To go back to the functions without any change press the MENU button or wait for 8
seconds.
Please refer to the following diagram to address your DMX512 channel for the first 4 units:
Channel Mode
9 channels
16 channels
5.4 DMX 512 Configuration
Ch1 Ch2
Pan Tilt
°
540 270
0° 0°
Unit 1
1
1
9 Channel DMX512 Configuration(Mode 1)
Ch3 Ch4
Strobe Red
°
Open
240-247
Random Strobe
Open
232-239
Slow close
190-231
Fast open
Open
182-189
Slow open
140-181
fast close
Open
132-139
16-131
Open
0-15
Unit 2 Unit 3
10 19
17 33
Ch5 Ch6
Green Blue
11A
Unit 4
28
49
Ch7 Ch8
White/
Dimmer
Amber
240-255
Stand alone
200-209
Reset
80-89
Disable blackout
while pan or tilt move
70-79
Enable blackout
while pan or tilt move