Safety Instruction - ACME Junior Series User Manual

Safety Instruction

1
WARNING
 Please keep this User Manual for future consultation.
 Unpack and check carefully there is no transportation damage before using the unit.
 Before operating, ensure that the voltage and frequency of power supply match the power
requirements of the unit.
 The unit is for indoor use only and only in a dry location.
 Disconnect mains power before fuse/lamp replacement or servicing.
 Replace fuse/lamp only with the same type.
 Make sure there are no flammable materials close to the unit while operating as it is fire
hazard.
 Maximum ambient temperature is TA: 40℃. Don't operate it where the temperature is higher
than this.
 Turn off the power and allow about 15 minutes for the unit to cool down before replacing bulb
or serving.
 In the event of serious operating problem, stop using the unit immediately. Never try to repair
the unit by yourself. Repairs carried out by unskilled people can lead to damage or
malfunction. Please contact the nearest authorized technical assistance center. Always use
the same type spare parts.
 Do not touch any wire during operation as high voltage might be causing electric shock.
Please read carefully the instruction which includes important information
about the installation, usage and maintenance.
4A