ACME SPLENDOR 90 User Manual page 9

ENTER button and the display will blink. Use DOWN and UP button to select the yes (yes
blackout) or no (no blackout) mode. Once selected, press the ENTER button to store. Back
to the main functions without any change press the MENU button or wait for 8 seconds.
Pan Inverse
Press the MENU button up to when the Pan Inverse is showing on the display. Pressing
ENTER button and the display will blink. Use DOWN and UP button to select the No
(Normal) or Yes (pan inverse) mode. Once selected, press the ENTER button to store. Back
to the main functions without any change press the MENU button or wait for 8 seconds.
Tilt Inverse
Press the MENU button up to when the Tilt Inverse is showing on the display. Pressing
ENTER button and the display will blink. Use DOWN and UP button to select the No
(Normal) or Yes (pan inverse) mode. Once selected, press the ENTER button to store. Back
to the main functions without any change press the MENU button or wait for 8 seconds.
Back Light
Press the MENU button up to when the Back Light is showing on the display. Pressing
ENTER button and the display will blink. Use DOWN and UP button to select the on (back
light on) or off (back light off 1 minute after auto show) mode. Once selected, press the
ENTER button to store. Back to the main functions without any change press the MENU
button or wait for 8 seconds.
Display Inverse
Press the MENU button up to when the Display Inverse is showing on the display. Pressing
ENTER button and the display will blink. Use DOWN and UP button to select the No
(Normal) or Yes (display inverse) mode. Once selected, press the ENTER button to store.
Back to the main functions without any change press the MENU button or wait for 8
seconds.
Auto Test
Press the MENU button up to when the Auto Test is showing on the display. Pressing
ENTER button and the display will show Test... and the unit will run self-test by built-in
program. To go back to the functions press the MENU button.
Manual Test
Press the MENU button up to when the Manual Test is showing on the display. Press
ENTER button and Pan will blink, use UP and DOWN button to choose Tilt or Red or Green
or Amber/White or Strobe or Dimmer, press ENTER button to enter, then press UP and
Down button to adjust the value and press ENTER button to set next optional. Back to the
8A