KEB COMBIVERT F5 Instruction Manual page 28

Operator Parameters
ID:
Name:
Meaning
Parameter number (PNU):
Subindex:
Data type:
Coding:
Standard value:
Note:
ID:
Name:
Meaning
Parameter number (PNU):
Subindex:
Data type:
Coding:
Standard value:
Note:
ID:
Name:
Meaning
Parameter number (PNU):
Subindex:
Data type:
Coding:
Standard value:
Note:
ID:
Name:
Meaning
Parameter number (PNU):
Subindex:
Data type:
Coding:
Standard value:
Note:
28
OS23:
Revision_Counter (IM)
Revision counter of the F5 PROFINET operator
0197h
0
Uint16
1
1
This value is constant 1
OS24:
Profile_Id (IM)
Profile-ID of the F5 PROFINET operator. Although the KEB F5 PROFINET op-
erator operates with respect to the acyclic communication to the PROFIDRIVE
profile, it is assigned to the group of Generic device units, because it does not
support any parameters according to PROFIDRIVE specification.
0198h
0
Uint16
1
F600h: Generic device
This value is constant.
OS25:
Profile_Specific_Type (IM)
The profile specific type of the F5 PROFINET operator
0199h
0
Uint16
1
0001h: Standard Controller
This value is constant.
OS26
Pnet_IPMask
Indicates the actual IP mask of the F5 PROFINET operator.
019Ah
0
Uint32
4-byte IP-Mask
0.0.0.0
The last assigned IP mask by the PROFINET controller is stored non-volatile
and remains active at the next start-up.From software V3.2 the value of this
parameter can also be written via diagnostic interface. A new value is stored
non-volatile, but active only at the next switch on.