Introduction; Preface; Product Description; Order Designation - KEB COMBIVERT F5 Instruction Manual

Introduction

1. Introduction
1.1

Preface

First we would like to welcome you as a customer of the company Karl E. Brinkmann GmbH and congratulation to
the purchase of this product. You have decided for a product on highest technical level.
The described hard- and software are developments of the Karl E. Brinkmann GmbH. The Karl E. Brinkmann
GmbH have prepared the documentation, hardware and software to the best of their knowledge, however, no
guarantee is given that the specifications will provide the efficiency aimed at by the user. The Karl E. Brinkmann
GmbH reserves the right to change/adapt specifications and technical data without having to give prior notice to
third parties.Errors excepted.
For a safe operation observe the safety and warning instructions in this instruction manual as well as in further
documentation. The safety and warning instructions specified in this manual do not lay claim on completeness.
The pictographs used in this instruction manual have following meaning:
Danger
Warning
Caution
Attention
strictly observe
Information
Aid
Tip
The information contained in the technical documentation, as well as any user-specific advice in spoken and writ-
ten and through tests, are made to best of our knowledge and information about the application. However, they
are considered for information only without responsibility. This also applies to any violation of industrial property
rights of a third-party.
Inspections of our units in view of their suitability for the intended use must be done generally by the user. Inspec-
tions are particularly required, if changes are executed, which serve for the further development or adaption of our
products to the applications (hardware, software, or download lists). Tests must be repeated completely, even if
only parts of hardware, software, or download lists have been modified.
The use of our units in the target products is beyond of our control and therefore exclusively the respon-
sibility of the user.
1.2

Product description

The Karl E. Brinkmann GmbH develops, produces and sells static frequency inverters in the industrial field of ap-
plication all over the world. The inverters of the type F5 can be equipped optionally with a PROFINET IO slave
interface. The F5 PROFINET operator is integrated into the frequency inverter housing by plug-in and fits into all
F5 devices. Here it concerns to a gateway, which controls the data transfer from PROFINET to the inverter control
and reverse. Internally the data are transferred via the serial KEB own protocol with the name HSP5.
1.3 Order informations
F5 PROFINET operator:
Accessories for the diagnostic interface (X6B):
HSP5 cable between PC and F5 PROFINET operator:
Adapter DSUB9 / Western:
4
00F5060-L100
00F50C0-0010
00F50C0-0020