Time-Out Timer - AnyTone AT-289 Instruction Manual

BACKGROUND OPERATIONS
will automatically exit this function.

Time-out Timer

The purpose of the Time-out Timer is to prevent any caller from using a channel for an extended
set in advance, the transceiver will stop transmitting with voice prompt.
Users can set TOT timer by programming software.
Time-Out Timer Pre-Alarm
The Time-Out Timer Pre-Alarm is to alarm users that overtime transmission is going to happen.
Users can program desired TOT Pre-Alarm time by programming software.
TOT Re-transmitting Time Setup
TOT Time is the interval between the stopped overtime transmission and
allowed re-transmission. Pressing PTT key before
transmission with voice prompt.
Users can set desired TOT
VOX Function
Professional
26
FM Transceiver
time, the transceiver will inhibit
Time by programming software.