D Contest Number Set Mode - Icom IC-7600 Instruction Manual

4
RECEIVE AND TRANSMIT

D Contest number set mode

This menu is used to set the contest (serial) number
and count-up trigger, etc.
• Setting contents
q During CW mode operation, push [KEYER] (F-3)
to select memory keyer screen.
w Push [EXIT/SET] to select memory keyer menu,
then push [001] (F-3) to select contest serial num-
ber set mode.
e Push [Y] (F-1) or [Z] (F-2) to select the desired
set item.
r Set the desired condition using the main dial.
• Push and hold [DEF] (F-4) for 1 sec. to select the
default condition or value.
t Push [EXIT/SET] twice to normal screen.
Number Style
This item sets the numbering system used for con-
test (serial) numbers— normal or short morse num-
bers.
Short morse numbers are also referred to as "cut"
numbers.
Count Up Trigger
This selects which of the four memories will con-
tain the contest serial number exchange. The
count-up trigger allows the serial number to auto-
matically increment after each complete serial num-
ber exchange is sent.
Present Number
This item shows the current number for the count-up
trigger channel set above.
43
• Contest number set mode screen
KEYER /
F-3
F-1 F-2 F-4
DEF
Normal
• Normal : Does not use short morse numbers
(default)
• 190 ANO : Sets 1 as A, 9 as N and 0 as O.
• 190 ANT : Sets 1 as A, 9 as N and 0 as T.
• 90 NO : Sets 9 as N and 0 as O.
• 90 NT : Sets 9 as N and 0 as T.
M2
• M1, M2, M3 and M4 can be set. (default: M2)
001
• Rotate the main dial to change the number, or
push and hold [001CLR] (F-4) for 1 sec. to reset
the current number to 001.
001
Main dial
EXIT/SET