D Memory Keyer Screen - Icom IC-7600 Instruction Manual

4
RECEIVE AND TRANSMIT

D Memory keyer screen

Pre-set characters can be sent using the keyer send
menu. Contents of the memory keyer are set using
the edit menu.
• Transmitting
q During CW mode operation, push [KEYER] (F-3)
to select memory keyer screen.
w Push [TRANSMIT] to set the transceiver to trans-
mit, or set the break-in function ON
e Push one of the function keys ([M1] (F-1) to [M4]
(F-4)) to send the contents of the memory keyer.
• Pushing and holding a function key for 1 sec. or push
[REPEAT] (F-6) while sending the contents of the
memory keyer to send the contents repeatedly; push
any function key except for to cancel the transmission.
• The contest serial number counter counts each time
the contents are sent.
• Push [−1] (F-5) to reduce the contest serial number
count by 1 before sending the contents of the memory
keyer to a station a second time.
• "M1"–"M4" are highlighted while transmitting.
• " " appears while transmitting repeatedly.
• Set the repeat interval of the memory keyer to 1–60
sec. (1 sec. steps). See
r Push [EXIT/SET] twice to return to normal screen.
For your information
When an external keypad is connected to [KEY] con-
nector on the rear panel, or one of [F-1]−[F-4] key of
the keyboard that is connected to the [USB] (A)
connector on the front panel is pushed, the pro-
grammed contents, M1—M4, can be transmitted
without selecting the memory keyer screen.
See pgs. ??, ??
41
(p. ??).
p. ?? for keyer set mode.
for details.
KEYER
TRANSMIT F-3
F-1 F-4
—
M1 M4
• Memory keyer screen
−1
F-5
EXIT/SET