3
BASIC OPERATION
Selecting an operating band
The triple band stacking register provides 3 memories
for each band key, storing frequency and mode infor-
mation.
This function is convenient when you operate 3 oper-
ating modes on one band. For example, one register
is used for a CW frequency, another for a SSB fre-
quency and the other one for a RTTY frequency.
If a band key is pushed once, the frequency and oper-
ating mode last used are called up. When the key is
pushed again, another stored frequency and operat-
ing mode are called up.
See the table below for a list of the bands available
and the default settings for each band.
BAND
1.8 MHz
3.5 MHz
7 MHz
10 MHz
14 MHz
18 MHz
21 MHz
24 MHz
28 MHz
50 MHz
General
D Using the band stacking registers
[Example]: 14 MHz band
q Push [14 5], then select a frequency and an oper-
ating mode.
• A frequency and an operating mode are memorized in
the first band stacking register.
w Push [14 5] again, then select another frequency
and operating mode.
• This frequency and operating mode are memorized in
the second band stacking register.
e Push [14 5] again, then select another frequency
and operating mode.
• This frequency and operating mode are memorized in
the third band stacking register.
• When a fourth frequency and operating mode are
selected on a band, the first register set in step q, is
over written.
27
REGISTER 1
1.900000 MHz CW
3.550000 MHz LSB
7.050000 MHz LSB
10.120000 MHz CW
14.100000 MHz USB
18.100000 MHz USB
21.200000 MHz USB
24.950000 MHz USB
28.500000 MHz USB
50.100000 MHz USB
15.000000 MHz USB
REGISTER 2
1.910000 MHz CW
3.560000 MHz LSB
7.060000 MHz LSB
10.130000 MHz CW
14.200000 MHz USB
18.130000 MHz USB
21.300000 MHz USB
24.980000 MHz USB
29.500000 MHz USB
50.200000 MHz USB
15.100000 MHz USB
1.8
1
10
4
21
7
GENE
Band keys
REGISTER 3
1.915000 MHz CW
3.580000 MHz LSB
7.020000 MHz CW
10.140000 MHz CW
14.050000 MHz CW
18.150000 MHz USB
21.050000 MHz CW
24.900000 MHz CW
28.100000 MHz CW
51.000000 MHz FM
15.200000 MHz USB
3.5
7
2
3
14
18
5
6
24
28
8
9
50
F - INP
0
ENT
Need help?
Do you have a question about the IC-7600 and is the answer not in the manual?