Selecting Vfo/Memory Mode; Main/Sub Band Selection - Icom IC-7600 Instruction Manual

Selecting VFO/memory mode

Push [VFO/MEMO] to switch between VFO and
memory modes.
• "VFO" appears when in VFO mode, or the selected
memory channel number appears when in memory
mode.
• Pushing and holding [VFO/MEMO] for 1 sec. transfers
the contents of the selected memory channel to VFO
mode. (p. ??)
"VFO" indicator

Main/Sub band selection

The IC-7600 has 2 identical receivers, main and sub.
The main band is displayed on the left hand side, and
the sub band is displayed on the right hand side of
the LCD. Some functions can only be applied to the
selected band and transmission occurs on the main
band (except during split frequency operation).
Push [MAIN/SUB M.SCOPE] to select access to
the main or sub readout.
• The selected readout frequency is displayed clearly.
The sub readout functions only during split operation or
dualwatch.
MAIN VFO
Access to MAIN VFO
D Main/Sub band switching
Push [CHANGE] to switch the frequency and
selected memory channel between main and sub
readouts.
• Switches between transmit frequency and receive fre-
quency when the split frequency function is ON.
D Main/Sub band equalization
Push and hold [CHANGE] for 1 sec. to equalizes
the sub readout frequency to the main readout fre-
quency.
SUB VFO
(p. ??)
BASIC OPERATION
Memory channel number
MAIN
/SUB
M.SCOPE M.SCOPE
MAIN VFO
SUB VFO
Access to
CHANGE
3
VFO/MEMO
1
2
3
4
5
6
7
8
9
10
11
SUB VFO
12
13
14
15
16
17
18
19
20
21
26