Inspection And Maintenance - Optimum Optidrill B 24H Operating Manual

WARNING!
Before starting the machine you must be sure that

no dangers generated for persons,

the machine is not damaged.
6.2

Inspection and maintenance

The type and level of wear depends to a large extent on the individual usage and operating
conditions. Any indicated intervals therefore are only valid for the corresponding approved con-
ditions.
Interval Where?
Start of shift
After each
maintenance or
repair work
Every month
Maintenance
Version 2.2.6 - 2020-07-21
What? How?
Examination for outside damages.

Safety check on page 14

Lubricate the drill column regularly with commercial oil,
machine oil, engine oil.

Lubricate the toothed rod regularly with commercial grease
(e.g. friction bearing grease).
Abb.6-1: Drilling machine
Translation of the original instructions
Drilling column
Toothed rod
B24H | B24HV | B28H | B28HV GB
55