Inspection And Maintenance - Optimum OPTI drill DH 26GT Operating Manual

WARNING!
Before starting the machine you must be sure that
no dangers generated for persons,

the machine is not damaged.

6.2

Inspection and maintenance

The type and level of wear depends to a large extent on the individual usage and operating
conditions. Any indicated intervals therefore are only valid for the corresponding approved con-
ditions.
Interval Where?
Start of shift
After each
maintenance or
repair work
Weekly
Maintenance
Version 1.2.9 - 2021-09-28
What? How?
Examination for outside damages.

Safety check on page 79

Oil the plain bearing points of the shaft with the oiler cup.
Img.6-1: Oiler cup drill head
Translation of original instruction
Oiler cup
DH26GT | DH28GS | DH32GS EN
119