Table of Contents
Advertisement
Monitoring
Start Up/ Shutdown
START
You can connect NVR to a PC in the same network and control or manipulate it on the PC monitor.
1.
Connect the adaptor to the 48V PoE power input
port in the rear panel of NVR.
Make connection when the power is not applied yet.
2.
Connect the adaptor to the 12V power input port in
the rear panel of NVR.
3.
Turn on the power switch in the rear panel of NVR.
With a beep, the logo screen appears several
seconds after the front LED turns on.
4.
When the booting process is completed, the live
screen then the login screen appears.
Log In
To manipulate or access the menus of NVR, you should have logged in.
1.
When the system starts, the login screen appears.
2.
Select a user and provide the password.
The default password of the "ADMIN" account is
"1234".
Click <OK>.
3.
If the login information is correct and valid, you will
see the live screen.
For the security purpose, change the password right
after you purchased the product.
.
Log Out
To prevent unauthorized access, it is recommended to log out when you leave the screen.
Hover the cursor near the bottom of the screen to display the menu.
In the monitoring screen, click <MENU> in the
1.
bottom left corner of the screen to <LOG OUT>, or
press the [LOGOUT] button on the remote control.
2.
2Access to Search / Backup / System Setup /
Record Setup / System Shutdown will be restricted.
Advertisement
Table of Contents
